Sony Reader PRS-600 PDF Service Manual

HOW TO MAKE THE SD MEMORY CARD FOR TEST MODE USE ONLY 1. Ready for the SD memory card. 2. Make the new directly as “/Sony Reader/software” on the SD memory card. 3. Make the new fi le as “/Sony Reader/software/Autorun.xml” on the SD memory card. 4. Confi rm the method of obtaining the program data for test mode to each service headquarters.

HOW TO ENTER THE TEST MODE
1. Insert the SD memory card with the test mode data is inserted while pressing the [HOME] and [VOL +] buttons.
2. After a while, indicate the test mode menu, enter the test mode.
3. Press the [<]/[>] buttons, change the test mode menu page 1/page 2.
1. Test Panel
2. Touch the “Test Panel” in the test mode menu page 1.
The screen is changed into the image fi les. (all image fi les of in the directly as “/Sony Reader/software/images”)
2. Press the [<]/[>] buttons, change the image fi les.
3. Press the [size] button, image fi le display size change to 600×800 or 500×700.
4. If there are no image fi les, screen is fi lled with grayscale color. Press the [<]/[>] buttons, change the grayscale color. When the setting of “17. Slideshow Setting” is turning on, the image fi les (or grayscale color) are changes by the automatic operation.
5. Press the [HOME] button, return to the test mode menu.
2. Drawing with point
1. Touch the “Drawing with point” in the test mode menu page 1.
The screen is changed into the drawing check.
2. The scanned coordinate is displayed while dragging.Press the [HOME] button, return to the test mode menu.

3. Test TP Coordinate
1. Touch the “Test TP Coordinate” in the test mode menu page 1.
The screen is changed into the touch panel coordinate.
2. The scanned coordinate is displayed pen down and pen up. The grid is drawn every 100 pixels. All the touch panel data is recorded in the log fi le. (pen down, pen move, pen up, pressure) screen coordinate raw coordinate pressure (Screen display)
3. Press the [HOME] button, return to the test mode menu.
4. Test All Keys
1. Touch the “Test All Keys” in the test mode menu page 2.
The screen is changed into the all keys state.

2. Each buttons are pressed, the display changed from white into the black.
3. It returns to the test mode menu when all buttons are pressed.
4. After the end of test, display of the right side of “Test All Keys” on test mode menu is changed from “Not Yet” into the “Done”.
5. Check battery
Touch the “Check battery” in the test mode menu page 1. Display of the right side of “Check battery” on test mode menu changes into the display of the battery level. 6. Factory Initialize Touch the “Factory Initialize” in the test mode menu page 1. Clean up all the evidence and reset all settings, then shutdown.7. Version confi rmation
1. Touch the “Version confi rmation” in the test mode menu page
2. Each version of this set are displayed.
3. Press the [HOME] button, return to the test mode menu.

Download Sony Reader PRS-600 PDF Service Manual


November 24, 2009 | Posted in Electronic Manual, Software

Related Info:

Comments

Leave a Reply