PC30F and PC30G Series MotherBoard PDF User Manual
Simultaneous Sample and Hold With a conventional / D boards, a small time interval between the sampling channels. In some applications, such as those requiring accurate measurements of phase, this delay, however small, is too large.
The FS16 and GS16 (16 entries SSH) and FS4 and GS4 (4 inputs and 12 inputs normal SSH) displays all entries simultaneously SSH. The PC30F and G-series tables are half-size, low cost, high-precision analog and I / S digital boards for the IBM PC / AT and compatible with the series of computers. New FPGA technology allows PC30 many features to be controlled from software, reducing the number of jumpers on the board. The PC30 is a development known PC30C, PC30D and PC30PG family, and is fully compatible with these cards.
The PC30 can be plugged into any slot of a PC / AT or compatible. Programmable Gain The PC30F, F, G and GA models feature software-programmable gain. The gain of each of the 16 input channels can be independently set to 1, 10, 100 or 1000. The gain for each channel is stored in the internal memory of the gain of the PC30. In addition, the instrumentation amplifier boards can be configured to provide differential inputs software.
Download PC30F and PC30G Series MotherBoard PDF User Manual
Related Info:
Comments
Leave a Reply