Kodak EasyShare C330 Zoom Digital Camera PDF Users Guide
Using optical zoom
Use optical zoom to get up to 3X closer to your subject. Optical zoom is effective when the lens is no closer than 2 ft (0.6 m) to the subject or 5 in. (13 cm) in Close-up mode. You can change optical zoom before (but not during) video recording.
1 Use the Viewfinder or LCD screen to frame your subject.
2 Press Telephoto (T) to zoom in. Press Wide Angle (W) to zoom out. The Zoom indicator shows zoom status.
3 Press the Shutter button halfway to set the Zoom indicator exposure and focus, then press completely down to take the picture. (When taking videos, press and Digital zoom range release the Shutter button.) Optical zoom range
Using digital zoom
Use digital zoom in any Still mode to get an additional 5X magnification beyond optical zoom. Combined zoom settings are from 3X to 15X.
1 Press the Telephoto (T) button to the optical zoom limit (3X). Release the button, then press it again. The Zoom indicator shows zoom status.
2 Take the picture.
NOTE: You cannot use digital zoom for video recording. You may notice decreased image quality when using digital zoom. The blue slider on the zoom indicator pauses and turns red when the picture quality reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print.
Changing picture-taking settings
You can change settings to get the best results from your camera:
1 Press the Menu button. (Some settings are unavailable in some modes.)
2 Press to highlight the setting you wish to change, then press the OK button.
3 Choose an option, then press the OK button.
4 Press the Menu button to exit.
Customizing your camera
Use Setup to customize your camera settings.
1 In any mode, press the Menu button.
2 Press to highlight Setup , then press the OK button.
3 Press to highlight the setting you wish to change, then press the OK button.
4 Choose an option, then press the OK button.
5 Press the Menu button to exit.
Download Kodak EasyShare C330 Zoom Digital Camera PDF Users Guide
Comments
Leave a Reply