HTC Proprietary Treatment Requested PDF Service Manual
Product Specification Platform
• Microsoft Windows Mobile 2005 for Pocket PC Edition– English, Spanish, Traditional Chinese, Simplified Chinese, Italian, Portuguese, German
• Dimensions: Main unit :108mm(L) *58mm(W) * 18.1 mm(T)
• Weight :150g with battery pack Processor
• TI OMAP 850 Memory
• Flash ROM: 128MB/256MB
• Flash RAM: 64MB mobile Double Data Rate (DDR) LCD Module
• 2.8 “240 X320 dots resolution
• 64K-color TFT Transflective LCD with white LED back light.
• Sensitive touch screen
• Support screen rotation battery meter , and key lock icons on the lower right corner of today screen GSM/EDGE functional
• Audio codec:AMR,EFR,FR,HR
• Tri-band 900/1800/1900MHz, or 850/900/1900
• Internal antenna for tri-band GSM
• SMS (MO,MT) concatenated SMS (640 characters)
• Supplement services
~ Call holding/waiting/forwarding
~ Call barring
~ CLI (Calling Line Identity)
~ Display own number
DEGE Functionality
• EGPRS class B
• Multi-slot class 10
• PBCCH
• Link Adaptation and Incremental Redundancy SIM
• Accept 1.8V and 3V operation
• SIM Application Tool Kit release 98 class 3
• Over the Air (OTA) programming
• FND
• AND
• SDN
• Security PIN 1&2 Stylus
• Lock type mechanism Keyboard/button/switch
• One power button
• One voice dial/voice record (long press) on the same key
• One volume control button (up and down)
• One Camera capture (portrait mode default)
• One 5-way navigation Pad
• Send/Hands-free button
• End button
• 2 AP buttons (Start or Portal (by operator request)-left button, OK-right button) Notification
• One bi-color LED (Green and Red) LED for GSM standby, GSM message, GSM network status, notification ,and charging ststus
Cosmetic Inspection Criteria
6.1. Definition of Cosmetic Standard
B Standard is for refurbishment inspection.
7.2. Visual Inspection Requirements
2.1 Examination of the device shall be made with workbench light turned on. Ambient illumination is to be 1000±20 lux.
2.2 The inspector shall examine the device at a distance of 30cm± 30degrees for approximately 5 seconds.
2.3 If a visual defect is noted, the inspector shall have an additional 7 seconds to closely examine the defect and classify it according the criteria table.
7.3. Definitions of Inspection Defects and Areas Scratch:A linear cut that penetrated beyond the surface of the material.
A scratch can be felt by running your finger over it. Dot / Dent:A recessed spot or void in the surface of the material.
Lint:A linear foreign object beyond the surface of the LCD Bump:A hump in the surface of material
Area I:LCM, Bezel including phone key, APP button, action key and LED lens.
Area II:Keyboard, Housing, back side of battery, antenna cover, release button, stylus and side buttons.
Area III:Inner side of battery (not include battery), inside of SD connector, inside of USB port inside of Earphone jack and other area marked in the figure below.
D: Diameter/ L: Length/ W: Width/ Number: Number of defects/ S: Distance of dot to dot
Download HTC Proprietary Treatment Requested PDF Service Manual
Comments
Leave a Reply