HP Notebook PDF Startup Manual Guide
Step 1: Insert the battery
Do not mutilate or puncture batteries. Do not dispose of batteries in fire, or they can burst or explode, releasing hazardous chemicals. Rechargeable batteries must be recycled or disposed of properly. Your notebook is shipped with the battery installed. If the battery has been removed, you should install it. Turn the notebook upside down. Insert the connector end of the battery into the battery compartment, then slide the battery in until it latches.
Step 2: Connect AC power Use only the AC adapter included with your notebook (or other approved adapter that meets the power requirements of the notebook). Using the wrong AC adapter could damage the notebook or adapter or cause data loss and may void your warranty. Plug the AC adapter into the notebook. Connect the power cord to the AC adapter. Plug the power cord into a wall outlet. The notebook battery starts charging. When unplugging the power cord, unplug it from the outlet before unplugging it from the AC adapter.
Step 3: Connect a phone line Make sure the telephone line is an analog line, sometimes called a data line. (Do not use a digital line.) Connect the telephone cord (RJ-11) into a telephone jack. Plug the other end of the telephone cord into the RJ-11 modem jack on the notebook
Download HP Notebook PDF Startup Manual Guide
Comments
Leave a Reply