G3-card and R-card Audio/Video Cable PDF Hardware Installation Instructions

Hardware Installation
Step1: Insert the card onto an empty PCI slot. Connect the Audio/Video Cable to the connector in the same color.
Step 2: Turn on your PC and start Windows.
Step 3: Insert the included Software CD into CD-ROM.
Step 4: After driver being installed, restart your PC. See the detail of driver installation from page 25.

Connecting the Audio/Video Cable – referring to the figure on next page. The audio input connectors are with white wires and marks of “AID”
on them; the video input connectors are with red wires and the marks of “VID”. Note: It is known that 5004 card has compatibility problem with PPCI slot. 5004 cards can only be slots encountered.

Connecting the Audio/Video Cable – referring to the figure on next page. The audio input connectors are with yellow wires and marks of “A” on them (such as “A1/9”); the video input connectors are with black wires and the marks of “V” (such as “V8/16”). Connecting the Watchdog Wire – referring to the figure on next page. Plug the Watchdog Wire to the Reset connector of the Hardware Compression Card and then connect it to the Reset connector on the main board. With the Watchdog Wire connected, the system will be restarted if any abnormal conditions.

FPS is based on D1 resolution. For more information about the system requirements of different channels, please refer to the document “System Requirements of SCB-7000 series”. When setting up a system which is more than 16 channels, the throughput of the hard disk will not be enough. Build a RAID 0 system to solve this issue.

DRIVER INSTALLATION
Step 1: Insert the Installation CD. Run (nologo)InstallDri.exe from the CD-ROM directly to start the installation.
Step 2: In the CaptureCardDriver Setup Wizard dialog box, click Next to continuous.
Step 3: Check the “License agreement”. Click “I Agree” to continuous.
Step 4: Installing CaptureCardDriver.
Step 6: Click “Finish” after installing the system completely, and then choose to reboot now or later.

SOFTWARE INSTALLATION
Step 1: Insert the Installation CD. Run SetupTool.exe from the CD-ROM directly to start the installation.
Step 2: There are 4 system types of options in “System Setup Tool” window, select one and click Next to start the Installshield of Server
package.
- IP Surveillance System/Trial System
- MPEG-4 Hybrid System
- H.264 Hybrid System
- Full D1H.264 Hybrid System
Note: The SetupTool will detect the type of capture cards installs on PC and enable the options of system types automatically.
Step 3: In the InstallShield Wizard dialog box, click Next to continuous.

Step 4: Check the option “I accept the terms of the license agreement”. Click Next to continuous.
Step 5: Please enter your name and the company name for which you work. Click Next to continuous.
Step 6: Select “Complete Setup Type” or “Custom Setup Type” to install the System.

Download G3-card and R-card Audio/Video Cable PDF Hardware Installation Instructions


March 16, 2010 | Posted in Electronic Manual, Software

Related Info:

Comments

Leave a Reply