Kodak Carousel Projectors 4200 Series PDF Service Manual
Section 1:Replacements and Installations
[1] Disconnect the main power.
[2] Remove the PROJECTION LENS.
[3] Remove the LAMP MODULE ASSEMBLY.
[4] Remove the 6TorxSCREWS from the LOWER HOUSING ASSEMBLY.
[5] Pull the LOWER HOUSING ASSEMBLY off the TOP HOUSING.
Replacing the FAN SHAFT ASSEMBLY
[1] Disconnect the main power.
[2] Do the replacement procedure for the LOWER HOUSING ASSEMBLY.
[3] Cut the 3 WIRE TIES:
• 1 on BLOWER COVER wires
• 2 on SMALL CIRCUIT BOARD between the MOTOR and MECHANISM ASSEMBLY
December 28, 2009 | Filed Under Kodak Manual, Digital Camcorder Manual, Electronic Manual | Leave a Comment