CASIO IT-600 Computer Series Software PDF Manual
Backlight Auto Dimming The control panel can be used to set up whether or not the auto dimming function will be used and the waiting time until when dimming begins. Auto dimming is enabled only when the power is provided by the lithium-ion battery pack. It will not function when an external power supply is used. • If the terminal is left over in idle state – absolutely no key input or touching on the touch panel – while the power is turned on, the backlight will be automatically dimmed to save the power after a given period of time has been elapsed. • When the terminal is in the auto dimmed state, a press of key or a touching on the touch panel will disable the auto dimming function to resume the brightness. • While the auto dimming function has been set enabled, a brightness can be set in one of eight grades.
The default is 3. During the auto dimming function being set enabled, brightness cannot be set any brighter than the brightness illuminated by the backlight. The defaults are “Enable the auto dimming function” and “1 minute” for waiting time period until when the auto dimming function activates. Auto Backlight OFF The control panel can be used to set up whether or not the auto backlight off function will be used and the waiting time until when the auto backlight off function activates.
The auto backlight off function is operable for both when the power is provided by an external power source and when it is provided by lithium-ion battery pack. • If the terminal is left over in idle state – absolutely no key or touch panel inputting – with the power being turned on, the backlight will be automatically turned off to save energy. • When the terminal is in the auto backlight off state, a press of key or a touching on the touch panel will disable the auto backlight off function to resume the brightness. • While the power is being provided by lithium-ion battery pack and both the auto dimming function and the auto backlight off function have been set enabled, either one of the functions with preset time period shorter than the other will have the priority.
The default is “Enable the auto backlight off function” and “5 minutes for the waiting time” until when the auto backlight off function activates. Rotating Display The rotate display function for rotating the screen at 90, 180 or 270 degree is supported. When the screen is rotated, the touch panel coordinates system rotates in unison. • The device control library can be used to set up this display rotation feature in the application. • ChangeDisplaySettingEx() API function can be used to set up this display rotation feature in application.
Scanning Parameters Conditions that allow scanning a symbology in specific modes can be set for each readable symbology. Readable Symbology Bar code symbologies that are enabled or disabled for scanning can be specified. If only specific symbologies are to be scanned, set “Enable” for scanning on these symbologies only and “Disable” on the other symbologies. This will reduce decode processing time and lower the error rate. The default is “Enable scanning on all the symbologies”. Readable Digits The no. of readable digits can be set for each symbology. If only specific no. of digits is to be scanned, specify it for each readable symbology. This will reduce decode processing time and lower the error rate. Enable/Disable Check Digit Check digit can be set to “Enable” or “Disable” for each readable symbology. Setting the check digit will lower the error rate.
Download CASIO IT-600 Computer Series Software PDF Manual
Others Search:
manuals power supli computers PLJ2Comments
Leave a Reply