Car2PC Alpine Acura Honda Mercedes-Benz Volvo PDF Guide

Modifying the radio may void any outstanding warranty it may have.
This product is not affiliated with any of the OEM manufactures
There are no warranties expressed or implied by purchase of this product
While every care has been taken to provide a quality product, we cannot guarantee the Car2PC BMW adapter to function correctly if installation is not done according to the instructions in this guide
We‘re not liable for misuse of this product. Misuse includes improper installation, damage to the board or radio while trying to install, and illegal use of the modified radio

Tools needed
None

Preparation
1. Turn off car engine and remove key from ignition
2. In case if you want to attach Car2PC-MBUS adapter to an OEM or aftermarket radio you will need to unmount your radio from the dash in order to get access to a back side of the radio.
3. In case if you use Car2PC-MBUS with the 3 party adapter such as Blitzsafe or Monster iCruze, please make sure you install that adapter first. For that follow its installation manual. Adapter installation œ OEM / Aftermarket car stereo
4. Attach 8 Pin connector to the back of the stereo.
5. Find a place where you can place Car2PC. In many cars there is enough room in the dash to place Car2PC. Note: Make sure you mount Car2PC in a place with enough room so when you mount the car stereo back you do not break the adapter
6. You may use glove box or other spaces in a dash to direct USB+ Audio cables out
7. Mount your car stereo back into the dash, make sure it‘s clips are securely fastened
8. Now you can turn you car stereo on and switch it over to CD Changer mode. It should show Disk 1, Track 01 on a display.
9. Congratulations ! You have installed Car2PC-MBUS adapter and you may use it right away with your PC/laptop

Download Car2PC Alpine, Acura, Honda, Mercedes-Benz, Volvo PDF Guide


December 15, 2009 | Posted in Automotive Manual, Component Manual, Honda Manual

Related Info:

Comments

Leave a Reply