Camcorder/Digital Camera Li-Ion Battery Multicharger PDF Installation Instructions
Maintenance:
• Charge at room temperature
• Store in cool and dry place
• Clean up the terminals with a soft cloth if soiled
• Unplug AC power adapter when not in use
Description:
BATTERY MULTI CHARGER:
Power Input: DC 12-24V
Power Output: DC 8.4V
Charging currency: 600mA (MAX)
With replaceable plate for all models of Sony, JVC, Panasonic, etc.
With main charger and car charger:
AC power supply: Power Input: AC 100-240V
Power Output: DC 12.0V, 1A, 12W
Car charger adaptor: Power Input: DC 12-24V
Power Output: DC 4.2-12V
Dimensions: 106.5 x 69 x 37mm
Caution & Warning:
Do not expose the product to fire, water or moisture. Do not use AC power adapter other than specified by manufacturer.
Notes: While charging the battery pack, “STATUS“ and “CHARGE“ LED indicators will not light if the AC power adapter is not connected properly
Instructions:
• Plug the AC power adapter in a wall outlet.
• Connect the AC power adapter supplied with your char-ger to the DC in-jack.
• “STATUS“ LED indicator shows RED when the charger is ready and “CHARGE“ LED indicator shows flashing GREEN when waiting for battery pack.
• Slide battery pack into the Charger and “CHARGE“ LED indicator turns RED when charging.
• “CHARGE“ indicator flashes RED and GREEN alternatively when battery pack has been charged to over 90%.
• When the battery pack is fully charged, the “CHARGE“ LED indicator turns steady green.
• After the battery pack fully charged slide the battery pack out.
• Unplug power, “CHARGE“ and “STATUS“ indicator go out.
Download Camcorder/Digital Camera Li-Ion Battery Multicharger PDF Installation Instructions
Comments
Leave a Reply