Asus M59 Motherboard Installation PDF User’s Manual

Features
• Immense Performance: 5 fan capability (Side 120MM LED fan rear 120mm exhaust included)
• Night light: An ambient light sits over the 5.25” drives to give visibility in dark rooms or at LAN parties
• Black on Black: Smoked clear window and a black interior gives the best combination of black on black.
• Meshed front panel allows for more airflow
• 5.25” Stealth bay to keep a clean look
• NZXT Solid State bracket allows for two SSD drives to be installed Wire Routing: Motherboard punched holes allows for quick CPU bracket removable and optimal wire routing. Turned HDD also helps with providing a cleaner look.
• Pre-drilled water cooling holes on the back plate Front mounted USB, Audio, and E-SATA ports
• Support for external dual radiator at the top of the chassis
• High end graphics card support, the M59 features space that is especially designed to fit longer 10.5” cards

Detailed specifications
Dimensions (HxWxD): 449mm x 190mm x 508mm
Weight: 6.5 Kg
4 x External 5.25” Bays
7 x Internal HDD bays
Cooling Options:
1 x 120 mm
1 x 120mm Rear Exhaust (included)
1 x 120mm Side Intake LED ( included )
2 x 120/140mm Top exhaust

Before Beginning..
For safety issues, it is highly recommended that all users wear gloves during installation. Also, if you have any questions during installation, please send an email to service@nzxt.com before proceeding. Thank you. Getting starting For users building a new system, it is recommended that the side panels are removed before beginning the installation. The following steps will outline the steps to remove the top, side panels and the motherboard tray.
1. Remove the thumb screws securing the side panels.
2. Pull the side panel back, and then lift the panel to remove it. NZXT. 4

Motherboard Installation
Please refer to the case interior infrastructure and secure the power supply at the back of the case by using the screws provided.
1. Match the motherboard form factor ( ATX, M-ATX, Mini-ATX ) with the holes on the motherboard tray
2. Secure the standoffs onto the holes which match your motherboard
3. Lay the motherboard onto the standoffs and then continue to secure the motherboard with the screws provided.

LED, Power and Reset Installation
Please refer first to your motherboard manual to locate where the power switch and reset pins are located. The power and reset buttons are located at the front of the chassis. The colors following each instruction designate the color of the wires. 1. Connect the reset switch (labeled RESET SW) by connecting to your motherboard RESET connector. Make sure you always attach the white wire to ground. (Purple/Black +/-)
2. Connect the power switch pin (labeled POWER SW) to the PWR connector on the motherboard. (Yellow/Black +/-) 3. Connect the HDD LED (labeled H.D.D LED) to the appropriate headers on your motherboard. The HDD LED located on the front panel should flash Blue when there is
activity in the hard drive. (Green/Black, +/-) 4. Connect the POWER LED(labeled +P LED/-P LED) to the appropriate headers on your motherboard.(Blue/Black,+/-) All Black Pin Connectors correspond to ground. USB Installation 1. The USB is located at the front of the case

Asus M59 Motherboard Installation PDF User’s Manual

Comments

Archives

Categories

Random Posts

Recent Comments

Recent Info

Interesting Sites